Skip navigation

Taser C2 Lithium Power Mag Specs

Download original document:
Brief thumbnail
This text is machine-read, and may contain errors. Check the original document to verify accuracy.
TASER® C2 LITHIUM POWER
MAGAZINE
TASER C2 Lithium Power Magazine Models
Model
Lithium Power Magazine (LPM)

Model No.
39011

Specifications3
1. Housing Material: ABS Polycarbonate Blend
2. Shelf life: 10 Years at 77 °F [25 °C]
3. Environmental:
Temperature range: -4 °F [-20 °C] to: 122 °F [50 °C] Relative
Humidity: 15% to 80%
4. At room temperature 77 °F [25 °C] the Lithium Power
Magazine (LPM) will provide up to fifty, 30-second firings.

Color
Black

Features
1. Dust and moisture resistant5.

Physical Dimensions1,3
Model
LPM

Length (L)
1.64″ [4.19 cm]

Dimensions
Height (H)
Width (W)
1.63″ [4.14 cm] 0.96″ [2.44 cm]

Weight
1.6 oz [45.36 g]

Dimensions (Installed on C2)
Length
LPM - 6″ [15.24 cm]

1. Dimensions are in English [Metric].
2. Additional terms and conditions may apply (For additional information contact a TASER International sales
representative or visit online at www.TASER.com).
3. Product specifications may change without notice; actual product may vary from the picture.
4. Material Safety Data Sheet (MSDS) for lithium cells (two three-volt photo cells, Duracell® CR123A, are used) is
available upon request.
5. The LPM is dust and moisture resistant when properly installed in the C2.
6. The LPM is intended solely for use in TASER C2 devices. Any unauthorized use will void the warranty and user
assumes all liability.
7. Replace the LPM when the power LED display is yellow. The safety switch and cover must be open to replace the
LPM.
8. TASER® is a registered trademark of TASER International, Inc. All rights reserved.

RD-SPEC-LPMC2-001 Rev: A

May 15, 2007

TASER International reserves the right to change this specification without notice.

Page: 1 of 1